Professor John Fielke

Professor UniSA STEM

Mawson Lakes Campus (P1-41)
tel +61 8 830 23119

email John.Fielke@unisa.edu.au

Available for media comment
Research Degree Supervisor

About me

Professor John Fielke is an Industry Professor of Mechanical Engineering at the University of South Australia. He is based at the Mawson Lakes Campus.

Since 1983 John has developed experience in the research and design of agricultural machinery, specialising in the area of seeding and tillage machinery plus working in the area of product processing for the grains and dried fruits industries. His work has involved 11 years as being the Manager of R&D for agricultural machinery manufacturer Horwood Bagshaw.

For 3 years during 2002-2005 John undertook the role of Dean Research within the University of South Australia which has involved leadership in research and research education for the Division of Information Technology,... Read more

UniSA STEM

Harnessing connections across science, technology, engineering and mathematics, UniSA STEM creates innovative solutions and groundbreaking developments across teaching, learning and research.

Tweets by @UniversitySA

Research

Research focus

Agricultural and Veterinary Sciences
Biological Sciences
Environmental Sciences
Agriculture, Multidisciplinary
Biomedical Engineering

Highlights

Processing of almonds for earlier harvest/dehydration, reduced damage while hulling/shelling and improved cleaning.

Design and development of tillage and seeding equipment.

Shallow tillage tool design for dryland farming:-"The Influence of the Geometry of Chisel Plough Share Wings on Tillage Forces in a Sandy Loam" - Masters thesis; "Interactions of the Cutting Edge of Tillage Implements with Soil" - PhD thesis.

Processing of dried vine fruit involving contaminant removal, bulk handling, storage and transport.

Sorting and sizing of grain and other agricultural products.

Development of unique and innovative equipment for the mechanisation of agricultural and food processing industries (grafting of vines, extracting meat from crabs,... Read more

Research

Outputs

Research outputs for the last seven years are shown below. Some long-standing staff members may have older outputs included. To see earlier years visit ORCID, ResearcherID or Scopus

Open access indicates that an output is open access.

Chapters

Year	Output
2011	Duff, A, Aziz, S, Fielke, J, Johnston, H, Quinn, D & Zucco, J 2011, 'Scaffolding the tentative first steps and energizing orientation for first year engineering students', in S Grainger & C Kestell (eds), Engineering Education: an Australian Perspective, Multi-Science Publishing Co. Ltd, UK, pp. 195-204.
2009	Shahgoly, G, Fielke, J, Desbiolles, J & Saunders, C 2009, 'Modeling oscillation angle effects on the motion characteristics of oscillatory tillage', in S Pandalai (ed.), Advances in soil and tillage research, Transworld Research Network, India, pp. 81-104.
2008	Fielke, JM 2008, 'Finite element modeling of shallow working sweep tillage tools', in Subrata Karmakar, Modeling of Soil-Tool Interaction in Tillage, Transworld Research Network, Kerala, India, pp. 129-147.

Journal Articles

Year	Output
2023	Khosravani , A, Desbiolles, JM, Fielke, JM, Ucgul, M & Saunders, C 2023, 'Prediction of single disc seeding system forces, using a semi-analytical and discrete element method (DEM)', Agriculture (Switzerland), vol. 13, no. 1, pp. 1-18. Open access 3 3
2023	Khosravani, A, Desbiolles, JM, Saunders, C, Ucgul, M & Fielke, JM 2023, 'Prediction of single disc seeding system forces, using a semi-analytical and discrete element method (DEM) considering rotation effects', Agriculture (Switzerland), vol. 13, no. 1, article no. 202 pp. 1-17. Open access 3 3
2023	Panigrahi, SS, Singh, CB & Fielke, J 2023, 'A 3D transient CFD model to predict heat and moisture transfer in on-farm stored grain silo through parallel computing using compiler directives: impact of discretization methods on solution efficacy', Drying Technology: An International Journal, vol. 41, no. 7, pp. 1133-1147. 8 7
2022	Panigrahi, SS, Fielke, J & Singh, CB 2022, 'Evaluating isotherms and isosteric heat utilization during sorption characteristics of feed barley', Journal of Stored Products Research, vol. 96, article no. 101955,. 7 7
2021	Panigrahi, SS, Singh, CB & Fielke, J 2021, 'Strategies to mitigate dead-zones in on-farm stored grain silos fitted with aeration ducting modelled using computational fluid dynamics', Biosystems Engineering, vol. 205, pp. 93-104. 17 16
2020	Barr, J, Desbiolles, J, Ucgul, M & Fielke, JM 2020, 'Bentleg furrow opener performance analysis using the discrete element method', Biosystems Engineering, vol. 189, pp. 99-115. 56 42
2020	Panigrahi, SS, Singh, CB & Fielke, J 2020, 'CFD modelling of physical velocity and anisotropic resistance components in a peaked stored grain with aeration ducting systems', Computers and Electronics in Agriculture, vol. 179, article no. 105820, pp. 1-10. 26 23
2020	Panigrahi, SS, Singh, CB, Fielke, J & Zare, D 2020, 'Modeling of heat and mass transfer within the grain storage ecosystem using numerical methods: A review', Drying Technology: An International Journal, vol. 38, no. 13, pp. 1677-1697. 50 43
2019	Barr, JB, Desbiolles, JM, Fielke, JM & Ucgul, M 2019, 'Development and field evaluation of a high-speed no-till seeding system', Soil and Tillage Research, vol. 194, pp. 1-11. 47 35
2018	Barr, JB, Ucgul, M, Desbiolles, JM & Fielke, JM 2018, 'Simulating the effect of rake angle on narrow opener performance with the discrete element method', Biosystems Engineering, vol. 171, pp. 1-15. Open access 95 75
2018	Belal, E, Ding, Q, He, R, Li, Y, Yousaf, K & Fielke, J 2018, 'Short-term responses of soil cone index and biopore with different rates of straw incorporation in rice-wheat cropping system', Fresenius Environmental Bulletin, vol. 27, no. 5A, pp. 3452-3461. 5
2018	Ucgul, M, Saunders, C & Fielke, JM 2018, 'Comparison of the discrete element and finite element methods to model the interaction of soil and tool cutting edge', Biosystems Engineering, vol. 169, pp. 199-208. Open access 83 58
2018	Yang, Y, Fielke, J, Ding, Q & He, R 2018, 'Field experimental study on optimal design of the rotary strip-till tools applied in rice-wheat rotation cropping system', International Journal of Agricultural and Biological Engineering, vol. 11, no. 2, pp. 88-94. Open access 14 12
2017	Shirmohammadi, M & Fielke, J 2017, 'Conditioning reduces kernel damage when impact shelling almonds', International Journal of Food Engineering, vol. 13, no. 8, article no. 20160324, pp. 1-13. Open access 9 4
2017	Singh, CB & Fielke, JM 2017, 'Recent developments in stored grain sensors, monitoring and management technology', IEEE Instrumentation and Measurement Magazine, vol. 20, no. 3, article no. 7951690, pp. 32-36. 49 34
2017	Ucgul, M, Chris, S & Fielke, JM 2017, 'Discrete element modelling of top soil burial using a full scale mouldboard plough under field conditions', Biosystems Engineering, vol. 160, pp. 140-153. 88 67
2017	Ucgul, M, Saunders, C & Fielke, JM 2017, 'Discrete element modelling of tillage forces and soil movement of a one-third scale mouldboard plough', Biosystems Engineering, vol. 155, pp. 44-54. 100 71
2016	Barr, JB, Desbiolles, JM & Fielke, JM 2016, 'Minimising soil disturbance and reaction forces for high speed sowing using bentleg furrow openers', Biosystems Engineering, vol. 151, pp. 53-64. Open access 51 39
2016	Matin, M, Desbiolles, J & Fielke, J 2016, 'Strip-tillage using rotating straight blades : effect of cutting edge geometry on furrow parameters', Soil and Tillage Research, vol. 155, pp. 271-279. 63 40
2015	Barr, JB, Desbiolles, J & Fielke, J 2015, 'Bentleg tine openers for high speed sowing and low soil throw', Eyre Peninsula Farming Systems Summary 2014. Open access
2015	Bayhan, Y, Fielke, J & Saglam, C 2015, 'Performance of a dual tine and presswheel seeding module for a range of speeds, presswheels and sowing tine alignments', Bulgarian Journal of Agricultural Science, vol. 21, no. 2, pp. 454-460. Open access 1
2015	Berry, N, Fielke, J & Saunders, C 2015, 'A Mastercurve to predict annual ryegrass (Lolium rigidum) seed devitalisation when exposed to multiple single sided impacts', Biosystems Engineering, vol. 133, pp. 56-63. 5 4
2015	Ucgul, M, Fielke, JM & Saunders, C 2015, 'Defining the effect of sweep tillage tool cutting edge geometry on tillage forces using 3D discrete element modelling', Information Processing in Agriculture, vol. 2, no. 2, pp. 130-141. Open access 79
2015	Ucgul, M, Fielke, JM & Saunders, C 2015, 'Three-dimensional discrete element modelling (DEM) of tillage: accounting for soil cohesion and adhesion', Biosystems Engineering, vol. 129, pp. 298-306. 205 139
2014	Berry, NK, Fielke, JM & Saunders, C 2014, 'Determination of impact energy to devitalise annual ryegrass (Lolium rigidum) seed from one impact using double and single sided impacts', Biosystems Engineering, vol. 118, no. 1, pp. 138-146. 8 7
2014	Dingke, Z & Fielke, J 2014, 'Some physical properties of Australian Nonpareil almonds related to bulk storage', International Journal of Agricultural and Biological Engineering, vol. 7, no. 5, pp. 116-122. Open access 9 7
2014	Matin, M, Fielke, J & Desbiolles, J 2014, 'Torque and energy characteristics for strip-tillage cultivation when cutting furrows using three designs of rotary blade', Biosystems Engineering, vol. 129, pp. 329-340. 114 62
2014	Solhjou, A, Fielke, JM, Desbiolles, JM & Saunders, C 2014, 'Soil translocation by narrow openers with various bent leg geometries', Biosystems Engineering, vol. 127, pp. 41-49. 11 27
2014	Ucgul, M, Fielke, JM & Saunders, C 2014, '3D DEM tillage simulation: validation of a hysteretic spring (plastic) contact model for a sweep tool operating in a cohesionless soil', Soil and Tillage Research, vol. 144, pp. 220-227. 37 121
2014	Ucgul, M, Fielke, JM & Saunders, C 2014, 'Three-dimensional discrete element modelling of tillage: determination of a suitable contact model and parameters for a cohesionless soil', Biosystems Engineering, vol. 121, pp. 105-117. 243 164
2013	Matin, MA, Fielke, JM & Desbiolles, JM 2013, 'Furrow parameters in rotary strip-tillage: effect of blade geometry and rotary speed', Biosystems Engineering, vol. 118, no. 1, pp. 7-15. 81 44
2013	Solhjou, A, Desbiolles, JM & Fielke, JM 2013, 'Soil translocation by narrow openers with various blade face geometries', Biosystems Engineering, vol. 114, no. 3, pp. 259-266. 38 26
2012	Solhjou, A, Desbiolles, J & Fielke, J 2012, 'Throwing light on the effect of opener rake angle in no-till', no. 68, pp. 14-15. 57 43
2012	Solhjou, A, Fielke, JM & Desbiolles, JM 2012, 'Soil translocation by narrow openers with various rake angles', Biosystems Engineering, vol. 112, no. 1, pp. 65-73. 57 43
2011	Fielke, J & Bayhan, Y 2011, 'Effect of set up parameters for a dual tine and presswheel seeding module on seed placement and germination', Journal of Agricultural Machinery Science, vol. 7, no. 2, pp. 191-197.
2010	Shahgoli, G, Fielke, J, Saunders, C & Desbiolles, J 2010, 'Simulation of the dynamic behaviour of a tractor-oscillating subsoiler system', Biosystems Engineering, vol. 106, no. 2, pp. 147-155. 37 22
2009	Fielke, JM, Saunders, C & Shahgoly, G 2009, 'Application of power spectral density to recognize the important factors of tractor-subsoiler system vibration', Australian Journal of Multi-Disciplinary Engineering, vol. 7, no. 1, pp. 39-46.
2009	Shahgoli, G, Fielke, J, Desbiolles, J & Saunders, C 2009, 'Optimising oscillation frequency in oscillatory tillage', Soil and Tillage Research, vol. 106, no. 2, pp. 202-210. 80 41
2009	Shahgoli, G, Saunders, C, Desbiolles, J & Fielke, J 2009, 'The effect of oscillation angle on the performance of oscillatory tillage', Soil and Tillage Research, vol. 104, no. 1, pp. 97-105. 36 24
2008	Schneider, T & Fielke, JM 2008, 'Simulating the cornering behaviour of multiple trailed implements', Biosystems Engineering, vol. 100, no. 3, pp. 355-361. 5 3

Conferences

Year	Output
2019	Fielke, J 2019, 'On-farm evaluation of a new paradigm for almond drying and storage: Australia 2019 harvest', ASABE Annual International Meeting, ASABE - American Society of Agricultural and Biological Engineers, article no. 1900210, pp. 1-10. Open access
2019	Panigrahi, SS, Singh, CB & Fielke, JM 2019, 'Effect of mediterranean climatic condition during aeration and silo wall coating in on-farm grain storage in South Australia', ASABE Annual International Meeting, ASABE - American Society of Agricultural and Biological Engineers, article no. 1900976, pp. 1-10. Open access 5
2018	Fielke, J & Coates, M 2018, 'Lessons learnt from on-farm mechanical drying of almonds in 2017', VII International Symposium on Almonds and Pistachios, International Society for Horticultural Science, vol. 1219, pp. 273-280. 1
2018	Fielke, J & Coates, M 2018, 'The potential for infield hulling of early harvest almonds', International Society for Horticultural Science, vol. 1219, pp. 235-242. 2
2018	Fielke, JM 2018, 'Controlled drying and rehydrating of almonds on a farm scale in Australia', ASABE 2018 Annual International Meeting, American Society of Agricultural and Biological Engineers, paper no. 1800705, pp. 1-8. Open access 2
2018	Ucgul, M, Saunders, C & Fielke, JM 2018, 'Investigating the top-down burial capability of a cultivator using discrete element method (DEM)', 2018 ASABE Annual international meeting, American Society of Agricultural and Biological Engineers, pp. 1-8. Open access
2017	Ucgul, M, Saunders, C & Fielke, JM 2017, 'Particle and geometry scaling of the hysteretic spring/linear cohesion contact model for discrete element modelling of soil-tool simulation', 2017 ASABE Annual International Meeting, American Society of Agricultural and Biological Engineers, paper no. 1701372, pp. 1-12. Open access 7
2016	Barr, J & Fielke, J 2016, 'Discrete element modelling of narrow point openers to improve soil disturbance characteristics of no-till seeding systems', ASABE Annual International Meeting, American Society of Agricultural and Biological Engineers, article no. 162460906, pp. 1-14. Open access 11
2016	Fielke, JM, Coates, MC & Shirmohammadi, M 2016, 'Comparison of impact hulling of almonds using 3 impellor geometries', ASABE 2016 Annual International Meeting, American Society of Agricultural and Biological Engineers, paper no. 162459940, pp. 1-11. Open access 2
2016	Ucgul, M, Saunders, C & Fielke, J 2016, 'A method of quantifying discrete element method simulations of top soil burial from a mouldboard plough', 2016 American Society of Agricultural and Biological Engineers Annual International Meeting, ASABE 2016, American Society of Agricultural and Biological Engineers, paper no. 162460870, pp. 1-12. Open access 6
2016	Ucgul, M, Saunders, C & Fielke, J 2016, 'The effect of discrete element particle parameters on angle of repose and soil-tool force simulation results', 2016 ASABE Annual International Meeting, American Society of Agricultural and Biological Engineers, paper no. 162460861. Open access 5
2015	Barr, J, Desbiolles, J & Fielke, J 2015, 'From soil throw to bentleg tine research', GRDC Grains Research Update 2015, Grains Research and Development Corporation (GRDC). Open access
2013	Berry, N, Saunders, C & Fielke, J 2013, 'Opportunities to reduce the chaff processing requirements of a harvester weed seed destructor', 2013 Society for Engineering in Agriculture (SEAg) Conference, Engineers Australia Pty Ltd, pp. 371-379.
2013	Coates, M, Saunders, C & Fielke, J 2013, 'Review of aeration methods used within bulk storage systems for application with almonds', 2013 Society for Engineering in Agriculture (SEAg) Conference, Engineers Australia, pp. 326-335.
2013	Fielke, JM 2013, 'The performance of polyurethane coated shear rollers to shell in-shell nonpareil almonds', 2013 Society for Engineering in Agriculture (SEAg) Conference, Engineers Australia, paper no. 102, pp. 1-6.
2013	Fielke, JM, Ucgul, M & Saunders, C 2013, 'Discrete element modeling of soil-implement interaction considering soil plasticity, cohesion and adhesion', 2013 Annual Meeting for the American Society of Agricultural and Biological Engineers, American Society of Agricultural and Biological Engineers, article no. 131618800, pp. 3558-3566.
2013	Narayanan, R, Spuzic, S, Pundoor, M, Bari, S, Xing, K & Fielke, J 2013, 'Enhancing engineering qualities by adopting the total design approach in final year projects', in C Lemckert, G Jenkins & S Lang-Lemckert (eds), 24th Annual Conference of the Australasian Association for Engineering Education (AAEE2013), Griffith University, paper no. 6A3, pp. 1-8. Open access
2013	Zrna, B, Fielke, J & Saunders, C 2013, 'Investigating the use of acoustic vibrations to harvest winegrapes', 2013 Society for Engineering in Agriculture (SEAg) Conference, Engineers Australia, pp. 320-324.
2012	Solhjou, A, Fielke, J & Desbiolles, J 2012, 'Lateral translocation of surface soil by various no-till narrow point openers', 9th ISTRO Conference and IV SUCS Meeting : Striving for Sustainable High Productivity, Universidad de la Republica, Facultad de Agronomia, vol. 16, no. 3, pp. 336-342. Open access
2011	Fielke, J & Quinn, D 2011, 'Improving student engagement with self-assessment through ePortfolios', in (eds), 2011 AAEE Conference: Developing Engineers for Social Justice: Community Involvement, Ethics & Sustainability, Australasian Association for Engineering Education, pp. 473-478. Open access
2011	Khosravani, A, Desbiolles, J & Fielke, J 2011, 'Opportunities for improving the performance of single disc seeders in sticky soil conditions', Society for Engineering in Agriculture: Diverse Challenges, Innovative Solutions, Engineers Australia, pp. 256-265.
2011	Matin, M, Desbiolles, J & Fielke, J 2011, 'Measuring furrow properties in rotary strip-tillage systems', in (eds), Society for Engineering in Agriculture: Diverse Challenges, Innovative Solutions, Engineers Australia, pp. 368-378. Open access
2011	Matin, MA, Fielke, JM & Desbiolles, JMA 2011, 'Improving furrow backfill in rotary strip-tillage systems', 5th World Congress of Conservation Agriculture, WCCA/FSD Local Organising Committee, pp. 122-125.
2011	Solhjou, A, Fielke, J & Desbiolles, J 2011, 'Effect of rake angle on soil movement induced by narrow point openers', in R Hegarty, T Banjhazi & C Saunders (eds), Society for Engineering in Agriculture, Informit, pp. 433-442. Open access
2011	Solhjou, AA, Fielke, JM & Desbiolles, JMA 2011, 'Effect of narrow opener geometry on lateral surface soil movement and implications for no-till seeding', 5th World Congress of Conservation Agriculture 2011, WCCA/FSD Local Organising Committee, pp. 167-170.
2011	Ucgul, M, Fielke, J & Saunders, C 2011, '3D discrete element model simulation of a sinkage test', 2011 Society for Engineering in Agriculture Conference, Engineers Australia, pp. 497-505. Open access
2011	Ucgul, M, Saman, W & Fielke, J 2011, 'Modelling and evaluation of the solar still integrated greenhouse desalination systems', Australian Society for Engineering in Agriculture: Diverse Challenges, Innovative Solutions, Engineers Australia, pp. 1-10. Open access
2009	Duff, AH, Aziz, SM, Fielke, JM, Johnston, HM, Quinn, DM & Zucco, J 2009, 'Places, spaces and friendly faces: energising the orientation experience for first year engineering students', 20th Annual Conference for the Australasian Association for Engineering Education, University of Adelaide, pp. 569-574.
2009	Fielke, JM & Quinn, D 2009, 'Supporting self-assessment using e-portfolios', in C Kestell, S Grainger & J Cheung (eds), 20th Annual Conference for the Australasian Association for Engineering Education, University of Adelaide, pp. 405-410.
2009	Khosravani Goshtasb, A, Fielke, JM & Desbiolles, J 2009, 'A review of soil/tool adhesion principles and approaches to reducing limitations of disc seeders', in TM Banhazi & C Saunders (eds), 2009 Agricultural Technologies in a Changing Climate conference, SEAg, pp. 1-8.
2009	Solhjou, A, Desbiolles, J & Fielke, J 2009, 'Review of Factors Influencing Soil Movement Induced by Ground Openers', in TM Banhazi & C Saunders (eds), 2009 Agricultural Technologies in a Changing Climate Conference, SEAg, pp. 1-8.

Reports

Year	Output
2011	Aziz, SM, Waye, VC, Faulkner, ME, Andre, CA, Smith, EJ & Fielke, JM 2011, Exploring ways to articulate the developmental progression of UniSA GQs against academic standards and professional requirements, UniSA Press, Adelaide, South Australia.

Research

Patents

Details	Registry	Status
Apparatus and process for debittering olives and olives obtained thereby Fielke, John	World	Filed

External engagement & recognition

Collaborations

External engagement & recognition

Collaborations

Organisation	Country
Cambodian Agricultural Research & Development Institute	CAMBODIA
CIMMYT-Bangladesh,Private Individual	BANGLADESH
Department of Primary Industries - NSW	AUSTRALIA
GDA General Directorate of Agriculture, Department of Rice Crop	CAMBODIA
Grains Research and Development Corporation	AUSTRALIA
International Rice Research Institute	PHILIPPINES
Lethbridge College	CANADA
Nanjing Agricultural University	CHINA
Nepal Agriculture and Environmental Forum	NEPAL
Royal University of Agriculture	CAMBODIA
South China Agricultural University	CHINA
Southern Cross University	AUSTRALIA
University of Education in Karlsruhe	GERMANY
University of Mohaghegh Ardabili	IRAN
University of Namik Kemal	TURKEY
University of South Australia	AUSTRALIA

External engagement & recognition

Engagement/recognition	Year
Best Table Olive, Royal Adelaide Show Olives SA	2021
Honourable Mention in Best Research and Development Collaboration Award Business-Higher Education Round Table BHERT	2016
Member Institution of Engineers, Australia	2016
Member Society for Engineering in Agriculture, Australia (SEAg)	2016
Member American Society of Agricultural and Biological Engineers (ASABE)	2016
Member International Soil Tillage Research Organisation (ISTRO)	2016
Member Australasian Association for Engineering Education (AAEE)	2016
Guinness World Record: World's Longest Bike Guiness Book of Records	2015
Citations for Outstanding Contributions to Student Learning Office for Learning and Teaching, Department of Education and Training, Australian Government	2013

Teaching & student supervision

Research degree supervision

Supervisions from 2010 shown

Thesis title	Student status
130- Waste heat recovery from the exhaust gas of a diesel-gen-set to produce additional power using different Rankine and Organic Rankine cycles to compare the performance between different cycles.	Current
Reducing post-harvest loses in stored grains, seeds and nuts ¿ storage and aeration design	Current
A 3D finite volume based CFD model to improve on-farm stored grain aeration strategies under Southern Australian conditions	Completed
A semi-analytical force prediction model for a rotating flat disc blade opener	Completed
Defining and modelling the boundaries for mechanised dehydration to produce high quality almonds	Completed
Optimisation of an impact mill that processes chaff exiting a combine harvester to devitalise annual ryegrass (Lolium rigidum) seeds	Completed
Optimisation of the rotary tiller blade design for small scale strip-till planting	Completed
Optimising bentleg opener geometry for higher speed no-till seeding	Completed
Simulation of sweep tillage using discrete element modelling	Completed
Study into the mechanics of soil translocation with narrow point openers	Completed
Thermodynamic analysis of solar desalination technology in agricultural greenhousesSimulation of the tillage operation by means of the discrete element method (DEM).	Completed

more less

Professor John Fielke

About me

About me

UniSA STEM

About me

Professional Associations

Experience

Qualifications

Research

Research focus

Highlights

Projects

Outputs

Chapters

Journal Articles

Conferences

Reports

Current research & highlights

Patents

External engagement & recognition

Collaborations

Collaborations

External engagement & recognition

Best Table Olive, Royal Adelaide Show

Honourable Mention in Best Research and Development Collaboration Award

Member

Member

Member

Member

Member

Guinness World Record: World's Longest Bike

Citations for Outstanding Contributions to Student Learning

Teaching & student supervision

Courses and programs

Courses I teach

Research degree supervision

Gallery